Under the Patronage of H.H. Sheikh Khalifa Bin Zayed Al Nahyan, President of The United Arab Emirates

ABU DHABI NATIONAL EXHIBITION CENTER (ADNEC)

Abu Dhabi

United Arab Emirates

11-14 NOVEMBER 2019
Supported by

Exhibitor Details

3X ENGINEERING
Stand: 9340

Company Profile

3X ENGINEERING is one of the leading companies in pipeline repair using composite technology. Mainly operating in Oil & Gas industry, our expertise includes Energy and Construction sector. We not only manufacture and commercialize our own products, but we also offer a complete integrated service, from the design of the repair to onsite installation. From our head offices in Monaco, we operate worldwide, Onshore and Offshore/Subsea, thanks to our large distribution network.

Product Gallery

REINFORCEKiT 4D - Composite repair for pipe reinforcement

REINFORCEKiT 4D - Composite repair for pipe reinforcement

REINFORCEKiT® 4D is a long-term composite repair system for pipes suffering from external corrosion, leaks and mechanical damage. The original 3X concept is an association of Kevlar® tape and specific bi-component epoxy resin. REINFORCEKiT® 4D is a wet lay-up system, wrapped helicoidally around the pipe in order to bring the mechanical resistance to the damaged pipe section.


REINFORCEKiT 4D SUBSEA - Composite repair for subsea pipe

REINFORCEKiT 4D SUBSEA - Composite repair for subsea pipe

REINFORCEKiT®4D SUBSEA (R4D-S) is a long-term composite repair system for pipes suffering from external and internal corrosion, dents and leaks in offshore and subsea environments. The original 3X ENGINEERING concept is an association of Kevlar® tape, specific bi-component epoxy resin and primer. The composite is tolerant to wet conditions and can be easily installed by trained divers.


STOPKiT - Online leak sealing

STOPKiT - Online leak sealing

STOPKiT® is the most efficient repair in the world able to seal a leak online in few minutes. It stops various types of leak (oil, gas, water …) on pipe diameters from 4’’ to 56’’ and is also applicable on specific geometries (oval pipe, elbow) and irregularities like welds. This patented product is an emergency and temporary system and is available under several models and for various environments (onshore, offshore and subsea).


STOPKiT SUBSEA - Online leak sealing for subsea use

STOPKiT SUBSEA - Online leak sealing for subsea use

STOPKiT® SUBSEA is the most efficient repair in the world able to seal a leak online in few minutes in offshore and subsea environments. It stops various types of leak (oil, gas, water …) on pipe diameters from 4’’ to 56’’ and is also applicable on specific geometries (oval pipe, elbow) and irregularities like welds. This patented product is an emergency and temporary system and is available under several models.


ROLLERKiT - Pipe and support protection

ROLLERKiT - Pipe and support protection

ROLLERKiT® is a preventive and curative repair system for corrosion under support, to be installed both on support or on pipe. Depending on the level of corrosion, ROLLERKiT® can be applied directly on pipe for superficial corrosion. ROLLERKiT® on pipe ROLLERKiT® on support ROLLERKiT® is made of high polymer pads thermo-welded on glass fiber fabric and specific epoxy resin. Pads are designed to support the weight of the pipe according to ASME B31.1.


TANKiT - Emergency repair system for damaged tank

TANKiT - Emergency repair system for damaged tank

TANKiT® is an emergency and temporary reinforcement solution for damaged tanks and pressured vessels suffering from corrosion defects (internal/external corrosion) up to 100mm hole size. TANKiT® is a multi-layers product using a cold welded steel plate and Kevlar® patches impregnated with 3X specific resin. It can be applied without shutdown, unless active leakage. This pre-engineered product is sold in ready-to-use kit and can be used only in specific cases.


REINFORCEKiT PATCH - Long term repair system for damaged tank

REINFORCEKiT PATCH - Long term repair system for damaged tank

REINFORCEKiT® PATCH is a lasting reinforcement solution for damaged tanks and pressured vessels suffering from internal and external corrosion defects. This product is tailor-made for each repair and requires engineering and calcluations according to ISO 24.817 and ASME PCC-2. REINFORCEKiT® PATCH is made of Kevlar® patches and 3X bi-component epoxy resin. The dimensions and number of patches, the type and quantity of resin will depend on the defect and will be defined using 3X software.


REINFORCEKiT BEAM - Composite repair for damaged beam

REINFORCEKiT BEAM - Composite repair for damaged beam

REINFORCEKiT® BEAM is a composite product recommended to reinforce and repair corroded beams and other structures. Designed for lasting 20 years minimum, this product can renovate a structure suffering from severe corrosion (up to 80% of corrosion). Initially, REINFORCEKiT® BEAM has been co-developed in partnership with the French National Railway Company (SNCF) for railway industry to reinforce catenary supports (HEA beams) but this product is suitable for all structure designs.


DKiT - Corrosion protection for beam

DKiT - Corrosion protection for beam

DKiT® is recommended to protect all kind of structures from corrosion. It is applied on the structure base, on the junction area with concrete basement which is the weakest part due to corrosion developement. Initially, DKiT® has been co-developed in partnership with the French National Railway Company (SNCF) for railway industry to reinforce catenary supports (HEA beams) but this product is suitable for all structure designs.